austabd12
New Member
Posts: 10
Status: Offline
Joined:
pm | | Pipe Fittings factory (13th Dec 22 at 12:15am UTC) | | BRASS ELBOW FITTINGS
Brass elbow fittings is made by brass material (HPB57-3). Bend is a common connection type of pipe fittings in plumbing installation, used for the connection of the pipe bend, used to change the direction of the pipe.
Other names: 90掳 elbow, right corner bend, love and bend, stamping elbow, pressing elbow, mechanism elbow, welding elbow, etc.
Use: Connect two nominal pipes with the same or different diameter to make the pipe turn of 90掳, 45掳, 180掳 and various degrees
Advantages of brass elbow fittings
1. High heat transfer coefficient, which is because of the high flow rate, turbulence, and a thorough countercurrent;
2. The equipment component required for unit heat transfer is small;
3. Good compensation for temperature deformation.
Product Specification
Product Parameter
SIZE: 1/2", 3/4", 1"
Material: Brass
Field of Application: WATER-OIL-GAS
Working pressure: 20-40Bar/200--400 Psi
Connection: Female-Female,
Working Temperature: -20鈩?to 120 鈩?/p>
Brass material (Hpb57-3) chemical composition
Cu Pb Fe Sn Al Ni Mn
57.40672.47950.85520.76020.09850.34130.0404
Si Zn As Bi Ag Cr Sb
0.131237.81580.00070.0010.02480.00520.0255
Co Mg P S Ti V In
0.00210.00020.00010.00020.00010.00010.0002
Mo Nb Zr W Hg
0.00010.00010.00020.00010.0001
Certificate
Quality Control
Production Room
Assemble line and Packing line
Office Room
Factory Gate And Warehouse RoomPipe Fittings factory
website:http://www.bote-valves.com/fittings/pipe-fittings/ | |
|
